Standard Features
Interiors: The Floor, walls, ceiling and door liner are a Minimum of 11 GA. To ¼”
Type 304 stainless steel plate. The other interior surfaces are 18 and 20 gauge type 304 stainless steel sheet. The wall, floor, ceiling, and door liner are reinforced
Welded interior seams to form a rugged, vapor-tight unit
Insulated with non-settling, non-hygroscopic high “R” value fiberglass.

Exteriors:  are fabricated of structural steel and corrosion resistant steel sheet metal

Door: The door is front opening, sealed with a silicone gasket, the door latches are of the hand wheel type and when door is opened, all conditioning equipment is deactivated. Heavy-duty door hinges are made out of structural steel.
Tough, industrial quality, textured enamel paint finish
Access panels for easy serviceability.

Stainless steel drain is equipped with a shut off ball valve to allow vacuum operation. Pressure equalization system.

All chambers allow handling with a forklift.

Vacuum System
The vacuum within the chamber will be provided by a self contained vacuum pump, which is controlled by a vacuum controller a manual vent (dive) valve, an exhaust filter to collect exhausted pump oil and an inlet trap are included.

INSTRUMENTATION
Microprocessor based programmer/controller on all chambers. User selectable
Fahrenheit or Celsius temperature indication. Altitude setting and indication .
In unites of torr. Operator-oriented features for easy operation and programming.
Digital indication of program and control parameters. Looping feature to allow repeating complete or partial programs.
Guaranteed soak feature to let process variable reach set point before going to the next step. Real-time clock. Protection to retain controller parameters and programs in the event of a power failure.
Three-mode controller action, featuring proportional band, rate and reset adjustment for optimal control.

ELECTRICAL
Component mounted in a fully enclosed electrical cabinet.
Power connection terminal block and ground lug for easy utility connections.
All wiring enclosed in wiring ducts or bundled and strapped.
All wires numbered for easy identification.
All wiring meeting or exceeding the National Electrical Code.
Wire color-coded per J.I.C. specifications.

Since 1946, Webber Manufacturing has been a recognized leader in the design, development and manufacture of controlled environmental equipment.

Webber has developed quality partnerships in the pharmaceutical, educational, clinical, automotive, defense and electronics industries. In addition to sales throughout the United States, our equipment is in Korea, India, Canada and Mexico.

Selecting a manufacturing partner is an important decision. You need a partner who can support your reliability testing and quality requirements, your image, your product design demands, and comply with regulatory requirements.

Webber has all the resources to turn your ideas into reality. Throughout the development process, we’re committed to listening to and working closely with you so we can respond to your needs. Our manufacturing experts are actively involved in design to assure that your ideas can be produced.

Modular and one-piece construction

Single set-point and multi-ranges

Microprocessor controls

Humidity control available

Custom design